beautypg.com

Aeromotive 17158 - COBRA JET COMPLETE FUEL SYSTEM User Manual

Page 2

background image


Figure 1-1

1-6. Find a suitable place for the two tank vent pass through fittings (15645), typical locations is trunk floor. Drill two holes

making sure you place them in a location where you can get access to the back side for the lock nuts. The system
comes with two tanks vents and both must be used for the system to function properly.


1-7. Assembly two identical hoses, 90 degree hose end on one side and a straight on the other. These will be used for the

tank vent hoses, Figure 1-2.

Figure 1-2

See also other documents in the category Aeromotive For the car: