Gotham 4 DP PAR Directional SpecSheet User Manual
4” dp

Luminaire Type:
Catalog Number
(autopopulated):
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 08/12/13. Specifications subject to change without notice.
PAGE 1 OF 3
DP-4-PAR-DIREctIOnAL
Gotham Architectural Downlighting
Line Voltage Incandescent
4” DP
PAR Directional
Par Lamp
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
OPTICAL SYSTEM
•
Self-flanged, semi-specular clear, matte-diffuse or highly specular cone
designed to minimize back flash. Contour cut reduces visibility of inner housing.
•
Center Beam optical system centers the lamp relative to the true aperture,
optimizing lamp efficiency.
•
Tool-less 0°- 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during re-lamping and are visible from below the ceiling with
trim assembly removed.
•
Designed to allow hot aiming.
•
Optical system retained by self-aligning torsion springs.
•
Internal housing components painted black.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
•
Re-lamp capability from above or below ceiling.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Previous installation adjustment possible
without the use of tools above or below ceiling.
•
Secondary housing adjustment system for precise, final flange to ceiling
alignment.
•
Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2” - 3/4” and one 1/2” knockout for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box through the aperture.
•
Medium base porcelain socket with nickel-plated screw shell.
•
Thermally-activated insulation detector is replaceable without the use of tools.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: DP PAR16-30S 4ACT30 LD TRW
Series Wattage/Lamp
Aperture/Trim color
Type
Finish
DP
PAR16-30S
PAR16, PAR20 and PAR30S (short-
neck,75W max.) compatibility
4AC
clear
4BC
1
Black
4PC
Pewter
4WTC
Wheat
4GC
Gold
4WC
1
White painted
4MB
1
Black baffle
4WB
1
White baffle
T30
cut for angles 25°-40°
T20
cut for angles 15°-25°
T00
cut for angles 0°-15°
(blank)
Semi-specular
LD
Matte-diffuse
LS
Specular
Options
SDT
2
277V stepdown transformer (277V to 120V). Add 4” to width of fixture
SDT347
2
347V stepdown transformer (347V to 120V). Add 4” to width of fixture
TRW
White painted flange (Standard with Wc, MB, and WB.)
TRBL
Black painted flange
SF
2
Single fuse
RRL
3
RELOc
®
-ready luminaire. Provides compatibility with Lithonia RELOc system. Access
above ceiling required.
CP
chicago plenum
ACCESSORIES order as separate catalog numbers (shipped separately)
LFH300
Locking Filter Holder for use with PAR16 & PAR20.
F300
4
Lens for use with 300 series filter holder
LTWFH400 DBL Filter Holder for use with PAR20
F400
4
Lens for use with 400 series filter holder
LTWFH500 DBL Filter Holder for use with PAR30S
F500
4
Lens for use with 500 series filter holder