Asus TV FM 7135 - Manual (Page 13)

13 ASUS TV FM Card User’s Manual
Using Your TV FM Card
There are three general steps in using or setting-up your TV FM Card.
Step 1 Disconnect the CATV system or antenna from your TV system.
Step 2 Reconnect the CATV system or antenna to your TV FM Card.
Step 3 Connect the included and other accessories to your TV FM Card.
CATV/Home Antenna Connections
There are various types of cable TV (CATV) and antenna connections. Each type
requires a different method of connection.
NOTE Consult your dealer for the type of adaptor, splitter, A/B switch or combiner
that may be required when setting up your TV FM Card.
Your TV FM Card is capable of receiving up to 100 channels. If you do not have a
CATV system, you may use an indoor or outdoor antenna that carries only VHF
(channels 2–13), only UHF (channels 14–69), or VHF and UHF channels to connect
to your TV FM Card.
Your CATV sytem or antenna may be connected in either of the following two ways:
direct to the TV or through a VCR system.
Connection Through a TV System
2. Hardware Setup
Antenna
CATV
Connection Through a VCR System
To start using your TV FM Card, follow the steps and sketch on the following pages
to connect a CATV system or home antenna to your TV FM Card.
Antenna
CATV
2. H/W Setup