GE Industrial Solutions ISM - Manual (Page 5)

Modifications reserved Page 5/34
OPM_ISM_OPT_10K_M50_0GB_V021.doc Operating Manual ISM – Intelligent Synchronization Module
1 SAFETY RULES
With this document, GE gives to the user all the necessary information about the correct installation
and connection of the ISM.
Please read carefully this Operating Manual before installing or operating the equipment.
If any problems are encountered with the procedures contained in this Operating Manual, please
contact the nearest Service Centre before you proceed.
All ISM installation, maintenance and service work should be performed by qualified service personnel
only.
The KNOWLEDGE and the FULLY compliance of the safety instructions and the warning
contained in this manual are
THE ONLY CONDITION
to avoid any dangerous situations during installation, operation, maintenance work, and
to preserve the maximum reliability of the UPS system.
NOTE !
While every care has been taken to ensure the completeness and accuracy of this
manual, GE assumes no responsibility or liability for any losses or damages
resulting from the use of the information contained in this document.
GE
Refuses any responsibility in case of non-observance,
unauthorised alterations or improper use of the
delivered UPS.