GE Industrial Solutions ISM - Manual (Page 10)

Modifications reserved Page 10/34
OPM_ISM_OPT_10K_M50_0GB_V021.doc Operating Manual ISM – Intelligent Synchronization Module
2.2 SERVICE AND TECHNICAL SUPPORT
For any request of technical support please
contact the supplier who provided the system.
Stamp of your Dealer or local responsible of the Technical Assistance
(see page 3)
2.3 WARRANTY
GE operates through its authorised agents and warrants that the standard products will be free of
defects in materials and workmanship for a period of 12 months, after the date of the invoice, or such
other period as may be specified.
NOTE !
This warranty does not cover failures of the product which result from incorrect
installation, misuse, alterations by persons other than authorised agents, or
abnormal working conditions.
2.4 RECYCLING AT THE END OF SERVICE LIFE
NOTE !
This product has been designed to respect the environment, using materials and
components respecting eco-design rules.
It does not contain CFCs (Carbon Fluor Clorid) or HCFCs (Halogen Carbon Fluor
Clorid).
GE, in compliance with environment protection recommends to the User
that the ISM equipment, at the end of its service life, must be recovered
conforming to the local applicable regulations.