QTech Data Systems Tait TM8000 Radio - Manual (Page 23)

En
g
lish
Troubleshooting 21
Troubleshooting
When your radio won’t turn on
If the red, green and amber LEDs on the control head do not
light up when the radio is turned on, it is likely that no power
is reaching the radio. Check the following:
■
Is the power connector firmly plugged into the rear of
the radio?
■
Are the in-line fuses in good condition?
■
Is the power cable securely connected to the vehicle bat-
tery or power supply?
If all appears to be in order, then contact your radio provider
for further assistance.
Removing the radio from the vehicle
1 Switch off the radio.
2 Unscrew the four thumb screws that secure the radio
to the U-bracket .
3 Lift the radio clear of the U-bracket.
4 Disconnect the antenna and power cable from
the rear of the radio.
a
c
d
a
b
a
b
c d