Operation, Warning – BabyTrend HC01428 - TREND HIGH CHAIR - MOJITO User Manual

Page 5

OPEN HIGHCHAIR

Push the legs apart until fully open and locked.

(Fig. 16) Push downward on fold levers (left and

right) to ensure frame is locked open.

WARNING:

Always check

that the high chair is locked in the

open position before using.

WARNING:

The tray is not

designed to hold the child in the

chair. The child must be secured by

the safety harness at all times while

in the high chair.

TO ATTACH AND
OPERATE TRAY

TO ATTACH TRAY

To attach the Tray, line up the grooves on the

bottom of the tray with the armrests of the high

chair. Squeeze the Tray’s release handle and

slide the tray onto the armrests (Fig. 17). The

Tray has a 3-position adjustment. To adjust the

position, squeeze the Tray’s release handle located

underneath the tray and reposition the tray to the

desired position (Fig. 18). Release the Tray’s

handle. Check that the Tray is securely locked in

its new position.
TO ATTACH INSERT TRAY

The dishwasher safe food Tray Insert snaps onto

the High Chair Tray and is held in place by tabs

on the sides of the Tray. When installing the

Tray Insert make sure that its snaps into place to

prevent the child from removing the Tray Insert.

To remove Insert unsnaps tabs from the Tray.

OPERATION

Push

Tray Release located

underneath tray

3-position

Fig. 16

Fig. 17

Fig. 18

Fig. 19

Push down to

lock open

RECLINE SEAT

Squeeze recline lever on back of the seat and

adjust to the preferred recline or upright position.

(Fig.19). When adjusting the seat back position,

be very careful that the child’s arms, hands or

legs do not get caught.

WARNING:

It is

recommended that only children

capable of sitting upright

unassisted use the high chair in the

upright position.

WARNING:

Prevent serious

injury or death from falls or sliding

out. Always secure child in the

restraint system, either in the reclining,

semi-reclining or upright position.

TO USE SAFETY BELT

The Tray is not designed to hold the child in

the chair. Always keep child in view while

in high chair.

NEVER LEAVE CHILD

UNATTENDED

1. Place your child’s arms through the loops

formed by the shoulder and waist straps. Place

the crotch strap between your child’s legs.

Insert the Harness Buckles into the Center

Clasp with the Red Button.

2. Adjust shoulder and waist straps for your

child’s comfort and safety by sliding buckles

in either direction. Safety straps are to fit snug

around your child. (Fig. 20)

TO RELEASE SAFETY BELT

Push Red Button on Center Clasp, the two

Harness Buckles will pop free. (Fig. 21)

Adjust for a snug fit

Fig. 20

Fig. 21

Center Clasp