Operation, Warning, Maintenance – BabyTrend HC01091 - TREND HIGH CHAIR - MESA User Manual

Page 6

OPERATION

MAINTENANCE

6-position

WARNING:

Do not adjust

seat height with child in seat.

Adjust seat height before placing

your child in the high chair.

TO ADJUST SEAT HEIGHT

Squeeze both left and right lever of the Height

Adjustment Bracket and adjust to the ideal

position. (Fig. 22)

WARNING:

Always check

that the height adjustment bracket

is level and both left and right sides

locked before placing child in the

high chair.

TO FOLD HIGH CHAIR

The High Chair may be folded with the seat in any

of the height positions. The high chair will be the

most compact with the seat in the lowest position.

1. Place seat in the desired height position (Fig. 23).
2. Place Seat Back in the most upright position

(Fig. 19).

3. Squeeze the tray release handle and slide the

tray out. (Fig. 17) Hang the tray on the hooks

located on the back of the rear leg. (Fig. 23)

4. Pull upward on the release levers (located on

the sides of the frame) and push the rear legs

in the direction of the front legs until folded.

(Fig. 24) Chair is now ready to put away.

DO NOT

allow your child to play around a

folded high chair as it may fall.

TO UNFOLD HIGH CHAIR

Push the legs apart until fully open and locked.

Push downward on the fold levers (left and right)

to ensure the frame is locked. (Fig. 16)

CARE AND MAINTENANCE

WARNING:

Harness Straps and Basket are NOT washable.

Dishwasher Safe Tray Insert

The Tray Insert is dishwasher safe to 160 degrees Fahrenheit. Do not use scouring pads

on the Tray Insert as they will damage the surface and the Tray Insert will become more

difficult to clean.
High Chair/Tray

Clean High Chair and Tray after each use using mild household dish soap. Please use only

a soft bristle brush, sponge or cloth to clean the surface or remove particles of food.

DO NOT

submerge High Chair and Tray in water. Surface clean only.

Seat Pad (please refer to care label on the seat pad for cleaning instructions)

To remove the seat pad:

Remove Harness Straps by pushing Harness Attachment Tabs through the Harness slots on

the Seat Back, Seat Base, and Seat Pad. Remove Elastic Loops from Attachment Tabs on

Seat Base and Seat Back.

None-Washable Seat Pad:

Please use sponge or cloth with mild household detergents to surface clean the seat

pad.

DO NOT MACHINE WASH

the seat pad.

Washable Seat Pad:

Machine Wash COLD DELICATE CYCLE with non-chorine based Laundry

Detergent.

DO NOT USE BLEACH. HANG DRY. DO NOT MACHINE DRY.

Basket

NOTE:

Certain Models will have a Basket underneath the seat for storage. These Models

will be packaged with the Basket already attached to the Seat Base.
To remove:

The Basket is attached by four snaps. Release these snaps for removal.
To attach:

Feed snap strips around Basket Slots underneath Seat Base. Press firmly on the four snaps.

Fig. 22

Fig. 23

Fig. 24

Fig. 25

TO ATTACH OR REMOVE TOY

TO ATTACH OR REMOVE MUSIC TOY

The Music Toy (Part # 16) is attached through the

suction cup on the bottom of the Toy. To attach

simply press the Toy on the Tray, to remove lift up

a part of the bottom of the cup.
TO ATTACH OR REMOVE TEETHING TOY

Press the Teething Toy (Part # 17) connector into

the curved slot in Tray edge and snap bottom

of connector over lower lip of Tray. Reverse to

remove the Toy (Fig. 25).