B&B Electronics QSPXP-100 - Manual - Manual (Page 11)

B&B Electronics ExpressCard Serial Adapter User’s Manual Installing
Rev 1.00 (July 2007) Page 7
Installing under Windows Vista
Follow these steps to install the adapter under Windows Vista.
Step Procedure Description

Step 1 Turn on the power to your computer
system.
This is the system in which the device is to
be installed.

Step 2 Plug the ExpressCard into an available
ExpressCard slot on the computer.
Windows tells you that it has found new
hardware and launches the Found New
Hardware Wizard.
Figure 7 - Windows Vista "Found new hardware" prompt
Figure 8 - "Windows needs your permission to use this program" prompt
Step Procedure Description
Figure 7 illustrates the
Windows Vista Found new
hardware prompt. The Found
New Hardware Wizard
launches automatically when
you first plug in the Serial
Adapter.