Rainbow Electronics MAX1207 - Manual (Page 5)

MAX1207
65Msps, 12-Bit ADC
_______________________________________________________________________________________ 5
ELECTRICAL CHARACTERISTICS (continued)
(V DD = 3.3V, OV DD = 2.0V, GND = 0, REFIN = REFOUT (internal reference), C REFOUT = 0.1µF, C L ≈ 5pF at digital outputs, V IN =
-0.5dBFS, CLKTYP = high, DCE = high, PD = low, G/T = low, f CLK = 65MHz (50% duty cycle), C REFP = C REFN = 0.1µF to GND, 1µF
in parallel with 10µF between REFP and REFN, C COM = 0.1µF in parallel with 2.2µF to GND, T A = -40°C to +85°C, unless otherwise
noted. Typical values are at T A = +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DIGITAL OUTPUTS (D0–D11, DAV, DOR)
D0–D11, DOR, I SINK = 200µA 0.2
Output-Voltage Low V OL
DAV, I SINK = 600µA 0.2
V
D0–D11, DOR, I SOURCE = 200µA
OV DD
- 0.2
Output-Voltage High V OH
DAV, I SOURCE = 600µA
OV DD
- 0.2
V
Tri-State Leakage Current I LEAK (Note 4) ±5 µA
D11–D0, DOR Tri-State Output
Capacitance
C OUT (Note 4) 3 pF
DAV Tri-State Output
Capacitance
C DAV (Note 4) 6 pF
POWER REQUIREMENTS
Analog Supply Voltage V DD 3.0 3.3 3.6 V
Digital Output Supply Voltage OV DD 1.7 2.0
V DD
+ 0.3V
V
Normal operating mode,
f
IN
= 32.4MHz at -0.5dBFS,
CLKTYP = GND, single-ended clock
95.8
Normal operating mode,
f
IN = 32.4MHz at -0.5dBFS,
CLKTYP = OV DD , differential clock
103.8 119
Analog Supply Current I VDD
Power-down mode, clock idle,
PD = OV
DD
0.045
mA
Normal operating mode,
f
IN = 32.4MHz at -0.5dBFS,
CLKTYP = GND, single-ended clock
316
Normal operating mode,
f
IN = 32.4MHz at -0.5dBFS,
CLKTYP = OV DD , differential clock
342 393
Analog Power Dissipation P DISS
Power-down mode, clock idle,
PD = OV
DD
0.15
mW