TC Electronic UpCon - Manual (Page 9)

Software: TC Icon and UpCon firmware
English Manual 5
– Right-click the “Icon” application file and
choose “Extract…“ from the context menu.
In the dialog box that is shown next (“Select
destination”), select a folder where you can
easily find the application – e.g., the Windows
desktop.
– Click “Extract” to extract the application to the
selected destination.
– Launch the TC Icon application that you just
extracted by double-clicking its icon.
TC Icon will try to establish connections to all
connected TC devices on a local network, in-
cluding your UpCon.
If a connection cannot be established, please
refer to “Networking basics and troubleshoot-
ing” on page 13.
If you experience technical problems during
software download or installation, please ask a
person with administrator privileges on this com-
puter for assistance.
Updating TC Icon software
To update the TC Icon software on your PC when
a newer version is released,
– quit the TC Icon software if it currently running
on your PC,
– download and extract the newer version as
described in this section and
– replace the currently installed version by copy-
ing the newer version over it.