DeLOCK 62477 User Manual
DeLOCK Hardware
Delock Converter IDE 44 pin > mSATA with 2.5″ Frame
Description
This Delock converter enables you to connect a mSATA
SSD in half size or full size format which can be used as a
2.5″ HDD. The converter can be installed into your system
internally through an IDE 44 pin interface.
Specification
• Form factor: 2.5″
• Connector:
1 x IDE 44 pin male
1 x 4 pin power IC 1.4 MHz 5.5 V
1 x mSATA slot (half size / full size)
• For 3.3 V mSATA mdule
• Supports ATA/ATAPI-7
• Supports ATA/ATAPI Ultra DMA mode 0, 1, 2, 3, 4, 5, 6, 7
• Supports ATA/ATAPI PIO mode 0, 1, 2, 3, 4
• Bootable
• Operating temperature: 0 °C ~ 70 °C
• OS independent, no driver installation necessary
Item No. 62477
EAN
4043619624775
Country of origin
Taiwan, Republic of
China
System requirements
• A free IDE 44 pin interface
Package content
• Converter
• 2.5″ frame
• Screws, nuts, spacers
Package
• Box
© 2013 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
1