Altronix T1656C Installation Instructions User Manual
T1656c - ac power supply, Specifications table: input, Output
![background image](/manuals/265879/1/background.png)
Specifications Table:
Input:
• 115VAC 50/60 Hz, 0.5 amp.
Output:
• 16VAC/56VA (3.5 amp).
Features:
• Fused input protection.
• Green grounding lead.
Replace in-line fuse with 250V, 3.5 amp Fuse Only.
220VAC models are available upon request.
Installation Instructions:
1. Mount the AC power supply in desired location.
2. Connect the AC (115VAC 50/60 Hz) to the black and white
flying leads of the transformer (Fig. 1).
3. Measure output voltage before connecting device.
This helps avoiding potential damage.
WARNING: This installation should be made by qualified service personnel and should
conform to the National Electrical Codes and all local codes.
Enclosure Dimensions
(H x W x D) (approximate)
:
5.625” x 7” x 4.5” (142.88mm x 177.8mm x 114.3mm)
T1656C - AC Power Supply
Low Voltage AC Output
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIT1656 - Rev. 070908
E03M
Fig. 1
1.75”
(44.45mm)
1.75”
(44.45mm)
3.00”
(76.2mm)
5.50”
(139.7mm)
1.65”
(41.91mm)
1.65”
(41.91mm)
0.625”
(15.88mm)
1.30”
(33.02mm)
1.30”
(33.02mm)
4.45”
(113.03mm)
1.80”
(45.72mm)
1.80”
(45.72mm)
4.45”
(113.03mm)
7.00”
(177.8mm)
MEMBER
Green
Lead
(ground)
Black
In-line
Fuse
White
Black
Red