beautypg.com

Inspecting and changing fuses, Normally, 2 inspecting and changing fuses p. 305 – Acura 2013 TSX Sport Wagon User Manual

Page 306

background image

305

uu

Fuses

u

Inspecting and Changing Fuses

Inspecting and Changing Fuses

1. Turn the ignition switch to LOCK

(

0

. Turn

headlights and all accessories off.

2. Remove the fuse box cover.

3. Check the large fuse in the engine

compartment.

u

If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.

4. Inspect the small fuses in the engine

compartment and the vehicle interior.

u

If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.

1

Inspecting and Changing Fuses

NOTICE

Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system. If you do not have a replacement
fuse with the proper rating for the circuit, install one
with a lower rating.

Replace fuse with a spare fuse of the same specified
amperage.

Confirm the specified amperage using the charts on

P. 303

and

P. 304

.

There is a fuse puller on the back of the engine
compartment fuse box.

Fuse

Blown Fuse

Combined Fuse

Blown Fuse

Fuse Puller

13 ACURA TSX 5D-31TL76200.book 305 ページ 2012年7月27日 金曜日 午前9時42分

QRG

Index

2013 TSX Sport Wagon

Han

d

lin
g the U

n

expected

TOC

This manual is related to the following products: