Sony SLV-SE230G - Manual (Page 56)

73 Specifications
Ad
ditional Inf
o
rmation
Specifications
System
Channel coverage
PAL (I)
VHF IA to IJ, SA10 to SA13*
UHF B21 to B69
CATV S01 to S05, S1 to S20*
HYPER S21 to S41*
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP:PAL23.39 mm/s (recording/playback)
NTSC33.35 mm/s (playback only)
LP:PAL11.70 mm/s (recording/playback)
NTSC16.67 mm/s (playback only)
EP:NTSC11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 1 min. (with E180 tape)
* SLV-SE730I and SE230I only
Inputs and outputs
LINE-1 (EURO AV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LINE-2/LINE-3
21-pin
Video input: pin 20
Audio input: pins 2 and 6
t LINE-2 L o R* 1
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
AUDIO (OUT) R, L* 2
Phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
* 1 SLV-SE830G only
* 2 not available on SLV-SE230G/I
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
• SLV-SE230G/I
15 W
1.2 W (POWER SAVE is set to ECO2,
minimum)
• SLV-SE830G, SE730G/I
17 W
1.3 W (POWER SAVE is set to ECO2,
minimum)
Operating temperature
5
°
C to 40
°
C
Storage temperature
–20
°
C to 60
°
C
Dimensions including projecting parts and
controls (w/h/d)
Approx. 360 Ч 95 Ч 245 mm
(SLV-SE230G/I)
Approx. 430 Ч 96 Ч 245 mm
(SLV-SE730G/I)
Approx. 430 Ч 96 Ч 253 mm
(SLV-SE830G)
Mass
Approx. 2.8 kg (SLV-SE230G/I)
Approx. 3.1 kg (SLV-SE830G and
SE730G/I)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to
change without notice.