Zoom 1120 - Manual (Page 10)

10 Quick Start and Reference Guide
12
If you have not encountered any problems, your
modem is installed and you can move on to Testing
Your Faxmodem, below. If you are having installa-
tion problems, see Chapter 4.
Testing Your Faxmodem
Before you set up your software, start with a quick test to
check that your modem is working.
Open the Control Panel and double-click Modems. Under
the Diagnostics tab highlight the COM port for your mo-
dem and click More Info. This queries the modem with AT
commands. A list of responses means the modem is con-
nected. You may also want to use HyperTerminal or an-
other terminal program to call a bulletin board system.
Once you have determined that your faxmodem is working
properly, go on to Chapter 2 to install your communica-
tions software.
If you determine that your faxmodem is not working, first
try shutting down your computer and restarting it. Some-
times this will help Windows 95 or 98 identify and activate
the correct drivers. If restarting your computer doesn’t
work, read Chapter 4, Problems and Solutions.