beautypg.com

1 sound menu, Nu” (see – Yamaha HTR-5940 AV User Manual

Page 82

background image

78

SET MENU

Use this menu to manually adjust any speaker settings or
compensate for video signal processing delays when using
LCD monitors or projectors.

Speaker settings

A)SPEAKER SET

Use this feature to manually adjust any speaker settings.

y

If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.

Front speakers

FRONT

Choices: SMALL, LARGE

• Select “SMALL” (small) if you have small front

speakers that do not reproduce low-frequency signals
effectively. The low-frequency signals of the front left
and right channels are directed to the speakers selected
in BASS OUT.

• Select “LARGE” (large) if you have large front

speakers that reproduce low-frequency signals
effectively. All the front left and right channel signals
are directed to the front left and right speakers.

If “BASS OUT” is set to “FRNT” (see page 79), the LFE signals
found in Dolby Digital or DTS sources, the low-frequency signals
of the front left and right channels, and the low-frequency signals
of other speakers set to “SML” or to “NONE” are all directed to
the front left and right speakers regardless of the “FRONT”
setting.

Center speaker

CENTER

Choices: NONE, SML, LRG

• Select “NONE” (none) if you did not connect a center

speaker. The low-frequency signals of the center
channel are directed to the speakers selected in “BASS
OUT” (see page 79), and the rest of the center channel
signals are directed to the front left and right speakers.

• Select “SML” (small) if you have a small center

speaker that does not reproduce low-frequency signals
effectively. The low-frequency signals of the center
channel are directed to the speakers selected in “BASS
OUT” (see page 79).

• Select “LRG” (large) if you have a large center speaker

that reproduces low-frequency signals effectively. All
the center channel signals are directed to the center
speaker.

Surround left/right speakers

SUR. LR

Choices: NONE, SML, LRG

• Select “NONE” (none) if you did not connect surround

speakers. This unit is set to the Virtual CINEMA DSP
mode (see page 42) and “ SUR. B” is automatically set
to “NONE” (see below). The low-frequency signals of
the surround left and right channels are directed to the
speakers selected in “BASS OUT” (see page 79).

• Select “SML” (small) if you have small surround left

and right speakers that do not reproduce low-frequency
signals effectively. The low-frequency signals of the
surround left and right channels are directed to the
speakers selected in “BASS OUT” (see page 79).

• Select “LRG” (large) if you have large surround left

and right speakers that reproduce low-frequency
signals effectively. All the surround channel signals are
directed to the surround left and right speakers.

Surround back speakers

SUR. B

Choices: NONE, SML, LRG

• Select “NONE” (none) if you did not connect a

surround back speaker. The low-frequency signals of
the surround back channel are directed to the speakers
selected in “BASS OUT” (see page 79), and the rest of
the surround back channel signals are directed to the
surround left and right speakers.

• Select “SML” (small) if you have a small surround

back speaker that does not reproduce low-frequency
signals effectively. The low-frequency signals of the
surround back channel are directed to the speakers
selected in “BASS OUT” (see page 79).

• Select “LRG” (large) if you have a large surround back

speaker that reproduces low-frequency signals
effectively. All the surround back channel signals are
directed to the surround back speaker.

1 SOUND MENU

Note