Yamaha HTR-5790 - Manual (Page 74)

70
ZONE 2/ZONE 3 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
4
You can control Zone 2 or Zone 3 by using
the input selector, STANDBY, SYSTEM
POWER, MUTE and VOL –/+ buttons.
* VOL –/+ can be used only when VAR. is selected in
ZONE2 SET OUTPUT VOL (page 58).
5
Press SELECT k / n to exit from the Zone 2/
Zone 3 mode.
“ZONE2” or “ZONE3” will appear in the display window only
when k is pressed, and SYSTM only when n is pressed.
■ Turning this unit to either on or standby
SYSTEM POWER and STANDBY work differently
depending on the selected mode that appears on the
display window.
• When normal, Zone2 or Zone 3 mode is selected, you
can turn the main unit, Zone 2 or Zone 3 to on/standby
individually.
• When system mode is selected, or when YPC is
selected as the amplifier library (L:AMP) code, you
can turn the main unit, Zone 2 and Zone 3 to on/
standby all together simultaneously.
* “MAIN” appears for a few seconds when SYSTEM POWER
or STANDBY is pressed.
■ Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second/third room you will
only hear digital noise (that may damage your speakers).
Thus, the following considerations and adjustments need
to be made when playing DTS encoded discs.
For LDs or DVDs encoded with DTS
Only 2 channel analog audio signals may be sent to the
second/third room.
• for LDs: Set your LD player’s left and right outputs to
the analog soundtrack.
• for DVDs: Use the disc menu to set the DVD player’s
mixed 2-channel left and right audio outputs to the
PCM or Dolby Digital soundtrack.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2/
Zone 3 feature with CDs encoded in DTS.
Note
PHONO
POWER SLEEP
CLEAR LEARN
STANDBY
TRANSMIT RE–NAME
INPUT MODE SYSTEM
V-AUX
DTV DVR/VCR2 VCR 1 DVD
CBL/SAT MD/TAPE CD-R
TUNER MULTI CH IN CD
* REC
DISC SKIP
SET MENU
TV INPUT A/B/C/D/E
AUDIO
VOL
LEVEL
MENU
STRAIGHT TEST ON SCREEN
EFFECT
TV VOL
RETURN DISPLAY
PRESET PRESET
TV MUTE
TV VOL
SELECT
CH CH
TITLE
MUTE
+
+
+
–
–
–
LCD display SYSTEM POWER/
STANDBY
Normal mode* name of component turns the main unit
on/standby
Zone 2 mode “ZONE2” or “2:name
of component” turns Zone 2 to on/
standby
Zone 3 mode “ZONE3” or “3:name
of component” turns Zone 3 to on/
standby
System mode “SYSTM” turns everything (the
main unit, Zone 2,
Zone 3) on/standby
00_HTR-5790U_EN.book Page 70 Tuesday, December 9, 2003 9:16 AM