Yamaha AVX-S80 User Manual
Page 15
11
SPEAKER SETUP
PREP
ARA
T
ION
English
■
If you want to mount a speaker
on a commercially available
speaker stand
The provided mounting bracket with 1 pair of screw holes
(at an interval of 60 mm) can be used to mount the
speaker on a speaker stand.
*
Those screw holes can be used with M4 screws only.
1
Attach the bracket to the bottom of the
speaker by using the provided screw so that
the convex part of the bracket fits in the
grooved part on the bottom of the speaker
as shown below.
2
Mount the speaker on the speaker stand by
using the screw holes on the bracket.
Note
The mounting bracket is provided for each speaker.
Using the Yamaha Speaker Stand SPS-80
(option)
By using the Yamaha Speaker Stand SPS-80, speakers
can be placed on the floor. (Two stands make a set.)
* The SPS-80 is not available in some areas.
60 mm
Mounting
bracket
Screw
SPS-80
E3-S80-8-18(6.29)a
02.6.29, 4:32 AM
11