Wharfedale S-2500 - Manual (Page 6)

Getting Started
1. AC Power Connections
All S-Series power amplifiers are equipped with an internal AC power supply. Connect the
appropriate grounded IEC power cable to the power amp BEFORE connecting it to the power
outlet.
It is important to allow adequate ventilation to the powered mixer as it may become warm
during extended periods of operation.
Each S-Series amp is shipped with the correct power cable for the country in which it is to be
used. The S-Series amps are NOT to be used in a country using a different source supply
voltage other than for which it is designed. Note the operating voltage shown near the AC
power cord jack and ONLY connect this unit to the appropriate AC source voltage.
2. Packing
The packaging has been designed protect the mixer during transit. If any shipping damage has
occurred, consult your dealer and the shipping provider.
3. Safety
Avoid excessive heat, humidity, dust and vibration. Store and operate the power amplifier away
from high temperatures or humidity. Also, avoid locations which may be subject to excessive
dust and vibration / physical shocks that could cause mechanical damage to the amp.
WARNING: REFER ALL MAINTENANCE, REPAIRS AND MODIFICATIONS TO QUALIFIED
SERVICE PERSONNEL! THIS PRODUCT CONTAINS NO USER-SERVICEABLE PARTS!
For the protection of the amplifier and other audio equipment, always turn off the power on the
amplifier and other system components before connecting or disconnecting audio cables.
4. Warranty
The S-Series power amplifiers are covered, by limited warranty, of any defects in workmanship
for a period of one year from the date of purchase. This warranty is non-transferable and
applies only to the original purchaser. If any warranty related issues occur, contact your dealer.
4
S-SERIES
Professional Amplifiers