Woods Equipment 1050 - Manual (Page 34)

34 Dealer Check Lists
51861 (Rev. 6/16/2006)
DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
Dealer’s Responsibility
Inspect the backhoe (and sub-frame when applicable)
thoroughly after assembly to be certain it is set up
properly before delivering it to the customer. The check
lists are a reminder of points to inspect. Check off each
item as it is found satisfactory or after proper adjust-
ments are made.
___ Check all bolts to be sure they are tight.
___ Check that all lubrication points have been lubri-
cated.
___ Check that all cotter pins and safety pins are
properly installed.
___ Properly attach backhoe to tractor and make all
necessary adjustments.
___ Check that hydraulic reservoir has been serviced
and that hydraulic system and all functions have
been operated through full cylinder stroke to
purge air from system.
___ Make sure all hydraulic fittings are tight and
hoses are properly routed and not twisted, bent
sharply, kinked or pulled tight.
___ After pressurizing and operating all backhoe
functions, stop tractor and make sure there are
no leaks in the hydraulic system. Follow all safety
rules when checking for leaks.
DELIVERY CHECK LIST
Dealer’s Responsibility
___ Present Operator's Manual and request that cus-
tomer and all operators read it before operating
equipment.
___ Point out all safety features of the equipment.
Explain the importance and meaning of all safety
decals and emphasize the potential hazards
when not followed.
___ Show customer how to make adjustments.
___ Explain importance of lubrication and show lubri-
cation points to customer.
___ Show customer the safe proper procedures to be
used when mounting, dismounting and storing
backhoe.
___ If backhoe is mounted to tractor 3-point hitch,
explain the importance of the Saf-T-Lok) limiter.
Point out (as shown in Operator's Manual) the
correct attachment and adjustment of the limiter.
___ Point out the correct mounting of the hydraulic
pump and routing of the hoses. Explain that dur-
ing operation, mounting, dismounting and stor-
age, care must be taken to prevent hose damage
from pulling, twisting and kinking.