Visioneer 1780 - Manual (Page 63)

53
A D V A N C E D F A X O P E R A T I O N
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation
Code is
5 1 . The preset Deactivation Code is 5 1 .
If you are always disconnected when accessing your TAD remotely, try changing
the Activation Code from
5 1 to and the Deactivation Code
from 5 1 to 9 9 9 .
To change Remote Codes
1 Press Function , 7 , 5 .
2 Press or to select ON or OFF.
REMOTE ACT.:ON
3 Press Set when the screen displays the setting you want.
4 If you want to, enter a new Remote Activation Code, then wait 2 seconds.
ACT.CODE: * 51
5 If you want to, enter a new Remote Deactivation Code, then wait 2 seconds.
DEACT.CODE:#51
6 Press Stop to exit.
Printing a Fax in Memory (Only for
FAX 1270, MFC 1770 and MFC1780)
If you have fax storage ON for remote retrieval, you can still print a fax in the
memory when you are at your machine:
1 Press 8 4 .
2 Press Start .
3 Press Stop .
Distinctive Ring
This fax machine feature lets you use the Distinctive Ring subscriber service
offered by some telephone companies, which allows you to have several telephone
numbers on one phone line. Each phone number has its own Distinctive Ring
pattern, so you know which phone number is ringing. This is one way you can
have a separate phone number for your fax machine.
Your fax machine has a Distinctive Ring function, allowing you to dedicate one
phone number just for receiving faxes. You’ll need to follow the directions below
See
Setting Fax
Storage
p. 59