Uniden UIP300G - Manual (Page 48)

46
Network Configuration
Network Configuration is used to assign administrative settings. All of these
settings are also available from the web-based administration and configuration.
Assignments in this menu are used to manage the network settings for the
UIP300G. Users can enter the Network Configuration menu from the
Configuration Menu. There are six network configurations that can be retrieved
or modified.
◆ Enable/Disable Dynamic Host Configuration Protocol
(DHCP IP Assignment for the Terminals)
◆ Terminal IP Address
◆ Terminal Subnet Mask
◆ Default Gateway IP Address
◆ Enable/Disable VLAN
◆ VLAN ID
To access the Network Configuration menu and assign administrative settings:
1. Press MENU key.
2. Use the
or keys to access the Configuration menu,
then press SELECT key.
3. Use the or keys to access the Network Configuration menu,
then press SELECT key.
Setup Menu:
Configuration
3/4
Configuration Menu:
Network Configuration
2/3