Uniden UIP300G - Manual (Page 25)

23
While the phone is on-hook standby mode, the current date and time is shown
on the LCD.
The telephone extension (E.164) number or H323 ID or display name is also
displayed on the LCD (if available) while the telephone is on-hook and in
standby mode.
Originating (Outgoing) Calls
Users can make calls using a handset or the handsfree feature. (Refer to
“Handsfree” on page 27 for a detailed discussion of handsfree operation.)
Using the Handset
To originate a call using the handset:
1. Pick up the handset (the telephone is off-hook).
2. Dial the telephone number (or extension number), or the IP address of the
called party.
3 Press SELECT key to initiate dialing or wait four seconds after the last
digit entered.
To cancel out of the phone book, press CANCEL/DEL key.
07/02/02 4:30PM
07/02/02
3000
4:30PM
Using the Phone Book
To originate a call using the phone book:
1. Press
to access the phone book. (Refer to “Phone Book” on page 27
for instructions for adding, editing, or deleting Phone Book entries.)
2. Once the phone book is displayed, use either the or to navigate
through the entries.
3. Once the desired entry is displayed in the LCD, press SELECT key to
initiate the call.