Uniden UDW10055 User Manual
Page 15
15
Changing to a Different Camera
►
On the receiver, press
to cycle through the enabled channels from CAM1 through CAM4. After
the last enabled channel, the receiver goes back to the first camera.
►
Each time you press
, the receiver goes to the next enabled channel, regardless of whether
there is a camera present on that channel. If there is no camera signal on a particular channel,
the receiver shows a black screen with the message No Signal.
►
You should only turn a channel On if you have a camera paired to that channel.
►
The receiver skips any channels that are set to Off in the menu.
4
3
2
1
NO SIGNAL
4
3
2
1
4
3
2
1
(Channel CAM2
set to Off.)