Toshiba e-STUDIO Multifunctional Digital Systems 356SE - Manual (Page 74)

3 USEFUL FUNCTIONS
72 Scanning With Dual Functions (Dual Agents)
Scanning With Dual Functions (Dual Agents)
When performing a scan operation, you can select 2 of the scan functions at one time.
y This function is available only when the hard disk is installed in the equipment.
y The WS Scan function cannot be selected together with other scan functions.
Scanning with dual functions (Dual Agents)
1 Place the original(s).
For help, refer to the Quick Start Guide.
3 Select a scan function that you want to use.
[e-FILING] — Your scans are saved in the e-Filing boxes.
[FILE] — Your scans are saved as files in the equipment’s shared folder or a network folder.
[E-MAIL] — Your scans are sent to specified e-mail addresses.
[USB] — Press this button to store scans to a USB storage device.
The WS Scan function cannot be selected with other scan functions.
4 Make the settings required for the selected scan function, and then press [OK].
y The required settings vary depending on the selected scan function. For instructions on how to perform settings
for each scan function, see the following sections:
P.18 “Scan to File”
P.26 “Scan to E-mail”
P.33 “Scan to USB”
For instructions on how to scan your documents with Scan to e-Filing, refer to the e-Filing Guide.
y Pressing [OK] on the screen for each scan function takes you back to the basic scan menu with the selected
function button marked with an orange line.
2 On the control panel, press the [SCAN] button to
enter the SCAN menu.