Tech4o Alti-Ski - Manual (Page 11)

20 21
11.2 Ascent Mode - Rate of Ascent
• In ascent mode, press the [o/-] button once to view the current rate
of ascent.
• To clear/reset the current rate of ascent, press and hold the [s/+]
button for 2 seconds.
11.3 Ascent Mode - Maximum Rate of Ascent
• In ascent mode, press the [o/-] button twice to view the maximum
rate of ascent for the trip.
• To clear/reset the maximum rate of ascent, press and hold the [s/
+] button for 2 seconds.
11.4 Ascent Mode - Total Daily Ascent
• In ascent mode, press the [o/-] button 3 times to view the total
daily ascent.
• The total daily ascent is automatically reset at midnight.
11.5 Ascent Mode - Total Lifetime Ascent
• In ascent mode, press the [o/-] button 4 times to view the total
lifetime ascent.
• To clear/reset the total lifetime ascent, press and hold the [s/+]
button for 2 seconds.
12.0 Run Counter - Display
To view the run counter press the [m]
button until the mode indicator displays R.
• In run counter mode the watch will
display run information in the top row
and the current home time on the
second row.
• A run is calculated based on altitude
adjustment. An additional run is added
to the total when a period of descent is
followed by an ascent greater than 60ft.
or 20m.
12.1 Run Counter - Trip Run Counter
• In the run counter mode, the default view is the trip run counter.
• A run is calculated based on altitude adjustment. An additional run
is added to the total if there is an ascent measured of more than
60ft. or 20m.
• To reset the total run counter, press and hold the [s/+] button for
2 seconds.
continues