Renesas Emulation Probe for M32C/88 Group M30880T-EPB User Manual
Renesas Hardware
Table of contents
Document Outline
- Prefece
- Important
- Precautions for Safety
- Contents
- User Registration
- Terminology
- 1. Outline
- 2. Setup
- 2.1 Flowchart of Starting Up the Emulator
- 2.2 Installing the Emulator Debugger
- 2.3 Connecting the Host Machine
- 2.4 Connecting the PC7501
- 2.5 Connecting the Power Supply for the Emulator
- 2.6 Turning ON the Power
- 2.7 Downloading Firmware
- 2.8 Self-check
- 2.9 Connecting the User System
- 2.9.1 Connecting to a 100-pin LCC Socket
- 2.9.2 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1)
- 2.9.3 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2)
- 2.9.4 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3)
- 2.9.5 Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 1)
- 2.9.6 Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 2)
- 2.9.7 Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 3)
- 2.9.8 Connecting to a 144-pin 0.5-mm-pitch Foot Pattern
- 2.10 Setting Switches
- 3. Usage (Emulator Debugger)
- 4. Hardware Specifications
- 5. Troubleshooting
- 6. Maintenance and Guarantee