RCA F27TF720 - Manual (Page 24)

22 Chapter 2
Using the Remote Control
STOP PAUSE
TV ON OFF
AUX DVD
PIP SWAP
REC•VCR+
RESET CH CTRL
PLAY FORWARD REVERSE
SOUND GO BACK
CH +
CH -
V
O
L V
O
L
SKIP MUTE
INFO
MENU CLEAR
GUIDE
ANTENNA
1 2 3
4 5 6
7 8 9
0
INPUT
VCR
VPORT
OK
SAT•CABLE
L.E.D.
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numbers and time settings directly
through the remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit channel,
press and hold the first digit for two seconds until two dashes appear to the
right of the number, then add the second two. Example: to tune to channel 123,
press and hold 1 for two seconds, press 2, then press 3.
Arrow buttons (up, down, left, right) Move through the on-screen menu
system. Also moves PIP window to different areas on the screen.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button
in SAT•CABLE mode.
AUX (auxiliary) Puts the remote in auxiliary mode to operate the component
you’ve programmed the remote to operate with this button. You can program
this button to control a cable box, audio components, a VCR, DVD player or
satellite receiver. If you set up the Auto Tuning feature (Chapter 3), pressing the
AUX button automatically tunes the TV to the correct channel.
Backlight Lights up some of the buttons in the dark.
CH (up and down) buttons Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
changing channels.
CH CTRL (Channel Control) Selects the picture window (main window or
PIP window) that changes when you press the channel up or channel down
button or the INPUT button.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
DVD Puts the remote in DVD mode. If you set up the Auto Tuning feature
(Chapter 3), pressing the DVD button automatically tunes the TV to the
correct channel.
FORWARD If you’re operating a VCR or DVD player with the remote control,
press FORWARD to advance a videotape or disc.
GO BACK Returns you to the previous channel.
GUIDE Displays the GUIDE Plus+ system; press GUIDE again to remove it from
the screen.
INFO Displays channel information.
INPUT In TV mode, press INPUT to toggle through the available Video Input
channels (FRNT/SVIDF, VID1/SVID1, VID2/CVID2, VPORT and the current
channel).
L.E.D. (light-emitting diode) The little light on the remote that lights when you
are programming the remote. It also lights when you press a valid button on
the remote.
MENU Displays the TV’s Main menu. You can also press and hold for 2
seconds to display the GUIDE Plus+ system.