beautypg.com

RuggedCom RUGGEDWIRELESSTM RS900W User Manual

Page 3

background image

3

©

2007 RuggedCom Inc. All rights reserved

Rev100

Table of Contents

1

Software Upgrade.................................................................................................................. 4

1.1

Overview......................................................................................................................... 4

1.2

Assumptions ................................................................................................................... 4

1.3

Software upgrade procedure .......................................................................................... 4

1.3.1 Step 1: File unpack and preparation........................................................................... 4

1.3.2 Step 2: File location.................................................................................................... 4

1.3.3 Step 3: Verify the ROS Software version.................................................................... 4

1.3.4 Step 4: Disable RSTP: ............................................................................................... 5

1.3.5 Step 5: Upgrade the IEEE 802.11 (Wireless) daughter-card firmware on RS900W

switch(es): ............................................................................................................................... 5

1.3.6 Step 6: Reset the RS900W switch(es) ....................................................................... 5

1.3.7 Step 7: Login to the ROS console .............................................................................. 5

1.3.8 Step 8: Verify the IEEE 802.11 (Wireless) daughter-card firmware version: .............. 5

2

Example RS900W configurations......................................................................................... 6

2.1

Configuration for WPA2 enabled “Access Point” operation............................................. 6

2.2

Configure the RS900W for “Client / Bridge” operation .................................................... 6

2.3

Configure the RS900W for “Client / IP Bridge” operation................................................ 7