RCA B27TF685 - Manual (Page 62)

60 C HAPTER F OUR : VCR O PERATION
V C R O P E R AT I O N
Your recording time options are: 30 minutes, 1 hour, 1 hour and 30 minutes, 2 hours, 3 hours, or 4
hours.
You can increase the length of time you want to record at any time during the recording process by
pressing the REC button again and choosing additional time.
If you want to stop recording before the time is up, press the REC button until the OTR display
shows “0:00.” The recording stops after a few seconds. Or, press the POWER button on the front
panel, then immediately press the STOP/EJECT button.
Note: In DVD mode, the OTR function doesn't operate with the REC button on the front panel. A
normal recording only operates.
Recording at a Later Time
You can set the built-in timer for unattended recording of up to eight different TV
programs. The timer can turn on the TV at the time you select, record for a selected
length of time, and then turn off the TV – all without you being there.
You can also choose to record a program one time, daily (every day, Monday through
Friday), or weekly (the same day every week.)
▼
1
Press the MENU button.
Press the DOWN arrow
button to select the VCR
Setup icon, then press the
RIGHT arrow button
(Timer Record is
highlighted).
2
Press the RIGHT arrow
button to display the Timer
Record menu.
The clock must be set to the correct
time and date before you program the
timer. For more information on setting
the clock, see page 23.
Timer Record
Program Review
True Repeat : Off
Block Repeat : 10
VCR Setup
CH
Move Sel. Exit
3
Press the LEFT/RIGHT
arrow buttons to select
the channel you want to
record. Timer Record
CH : 7
START : 10:30 am
END : 12:30 pm
Date : 1/ 01/ 2002
Fri
Speed : SP
Mode : Once
VCR Setup
CH
Move Sel. Exit
16061510-CHAPTER 4 12/13/02 11:48 AM Page 60