Nikon Nokia Digital Pen SU-27W - Manual (Page 7)

G e t t i n g s t a r t e d
7
English
3. To start charging, remove the pen cap,
and insert the pen into the USB cradle
so that the connectors on the pen are
facing the connectors on the cradle.
If you use a laptop PC that is not
plugged into a wall outlet, charging the
pen battery from the PC increases the
demand on the PC battery and reduces
battery life.
When you connect the cradle to your PC for the first time and the PC is
running the Microsoft Windows XP or 2000 operating system, the pen is
detected as new hardware and you are asked whether you want to install
the digital pen drivers. If you want to only charge the pen battery and do
not intend to transfer data from the pen to the PC, you do not need to
install the pen drivers, and you can exit the dialog box.
While the battery is charging, the battery indicator slowly flashes red,
yellow, or green depending on the charge level of the battery.
4. When the battery is fully charged, the battery indicator turns solid green.
Remove the pen from the cradle by lifting it, or unplug the USB connector
from the PC.
Charge from a wall outlet
To charge the pen from a wall outlet, do the following:
1. Open the USB cradle, and place it on a flat surface.
2. Remove the pen cap, and insert the pen into the USB cradle so that the
connectors on the pen are facing the connectors on the cradle.
3. Plug the USB connector of the cradle to
the AD-48 charger adapter that is
supplied with the pen.
9253212_SU-27W_en.fm Page 7 Monday, July 24, 2006 4:44 PM