Panasonic KX-PW211DL - Manual (Page 5)

55
Installations and connections
Installing the thermal recording paper
Rolling core is upside
Reverse
Slack
2
Install the recording paper.
Approx.
10 cm
3
Pull approximately 10 cm of recording paper
out of the unit, and close the control panel by
pressing “ ” down on both sides until it
clicks into place.
1
Open the control panel.
4
Pull the recording paper towards you and
tear it off.

When the unit runs out thermal recording paper, the following message will be displayed.
ｷﾛｸｼｶﾞｱﾘﾏｾﾝ U20
ｶﾐｦ ｲﾚﾃｸﾀﾞｻｲ
ｽｲｼｮｳﾋﾝﾊﾞﾝ :
UG- 0010A4
Install a new thermal recording paper.
Replacement thermal recording paper:
UG-0010A4 (15 m role type) ￥473
・As of September 2008. ・Tax included.
 Approximately 5 cm of recoding paper will
be fed out automatically.
KX-PW211DL_QG.indb 5 2008/09/11 13:05:22