Philips HP 405/355 - Manual (Page 6)

6
General Description (fig. 5) (pag. 3)
A Toothbrush
B Drive shaft
C ”Soft-Pressure” bending head
D On/off switch. Press to switch on. Press again to switch off.
E Click-on brushes (colour-coded for personal use)
F Charge unit with mains cord
G Holder for click-on brushes (HP 405 only)
H Pilot light (illuminates green during charging) (HP 405 only)
I Mounting-plate, screws and rawlplugs for wall mounting
(HP 405 only)
Bathroom use
• Mount to a wall (HP 405 only) or place the charge unit
where it cannot accidentally fall into water.
• As the toothbrush itself is waterproof you may choose to
use it while having a shower or bath.
Wall mounting (fig. 6-7) (HP 405 only)
How to charge (fig. 8-10)
• Ensure that the appliance is switched off when (re)charging.
• Before first use charge for at least 12 hours.
• In normal use, the toothbrush is recharged after each use by just placing
it back into the connected charge unit.
How to use (fig. 11-15)
• Let the toothbrush do the work for you: just guide the bristle carefully
along the teeth. Ensure that the brush touches the entire tooth surface
as well as a small section of the gums.
• If the head clicks into a straight position during brushing, this means that
you have applied too much pressure (fig. 15).
• Also refer to the provided Tooth Brushing Instructions card.