Philips 150P - Manual (Page 33)

AUTO button not working properly
The Auto Function is designed
for use on standard Macintosh
or IBM-compatible PC running
Microsoft properly Windows. ●
It may not work properly if
using non-standard PCs or
video card. ●
Imaging Problems
Display position is incorrect
Push the Auto button. ●
Adjust the image position
using the Horizontal Position
&/or Vertical Position in the
second Window ●
Image vibrates on the screen
Check that the signal cable is
properly connected to the
graphics board or PC. ●
Vertical flicker appears
Push the Auto button. ●
Eliminate the vertical bars
using the Clock Adjustment in
the first Windo ●
Horizontal flicker appears
Push the Auto button. ●
Eliminate the horizontal bars
using the Phase Adjustment in
the First Window ●
The screen is too bright or too dark
Adjust the contrast and
brightness using the First
Window. (The backlight of the
LCD monitor has a fixed life
span. When the screen
becomes dark or begins to
flicker,
please contact your
dealer.
●
Troubleshooting
file:///D|/Philips LCD/english/150P/safety/saf_troub.htm (2 of 3) [1/20/2001 3:10:05 PM]