Pioneer DV-260 - Manual (Page 29)

Getting started 04
29
En
Front panel controls
The (play), (stop), and (pause) buttons
on the front panel work in exactly the same
way as their remote control equivalents.
The combined scan/skip buttons on the front
panel (
and ) work slightly
differently from the remote buttons. Press
and hold for fast scan; press for track/chapter
skip.
See Front panel on page 18 for the location
and description of all the front panel controls
for your model.
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
• Track skip and number buttons for track
selection do not work with unfinalized CD-
R/RW discs.
Resume and Last Memory
When you stop playback of a DVD or Video CD
disc,
RESUME is shown in the display indi-
cating that you can resume playback again
from that point.
If the disc tray is not opened, the next time you
start playback the display shows
RESUME
and playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time,
the display shows
LAST MEM and you can
resume playback (this works for up to five
discs).
If you want to clear the resume/last memory
point, press (stop) while
RESUME or LAST
MEM is displayed.
• When a Video CD is loaded, the Resume
point is lost if the player is switched off.
• For the Last Memory function to work, you
must press (stop) to stop playback
before opening the disc tray.
• The Last Memory function doesn’t work
with VR format DVD-RW discs.
Stops playback.
DVD and Video CD: Display shows
RESUME. Press (stop) again to
cancel the resume function. (See
also
Resume and Last Memory
below.)
Press to start fast reverse scan-
ning. Press (play) to resume
normal playback.
Press to start fast forward scan-
ning. Press (play) to resume
normal playback.
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
Skips to the next track or chapter.
Numbers Use to enter a title/track number.
Press
ENTER to select (or wait a
few seconds).
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/WMA/MP3 ).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track.
Button What it does