Philips ellite e9000 - Manual (Page 9)

Quadpacer®
The Quadpacer 30-second interval timer ensures that you brush
all sections of your mouth evenly and thoroughly. At 30, 60 and 90
seconds, you hear a short beep and notice a pause in brushing action.
These signals tell you to continue with the next section of your mouth.
Programmable Quadpacer (specific types only)
The Programmable Quadpacer allows you to customise the Quadpacer in
1 of 3 ways:
You may choose to keep the default setting of a 2-minute brushing
time with the Quadpacer activated.
You may choose to extend the brushing time by 30 seconds to
2.5 minutes with the Quadpacer activated.
You may choose a 2-minute brushing time with the Quadpacer
deactivated.
To change the Quadpacer setting:
1 Place the handle in the plugged-in charger.
Press the Dual Speed Control button briefly and note which LED
lights up
.
3
Press and hold the Dual Speed Control button. Continue to hold the
button while the LEDs slowly cycle through the Quadpacer settings:
The fourth LED burns green: the 2-minute Quadpacer is active
(default setting).
The top LED burns green: the 2.5-minute Quadpacer is active.
-
-
-
-
,
,
1
3
1
3
EngliSh