beautypg.com

Philips Essence e5000 User Manual

Page 9

background image

Braces

, The brush should be placed at a 45-degree angle between

your brackets and gumline. Using light pressure, gently

move the bristles in a small circular motion so the longer

bristles reach between your teeth for 2 seconds. Then

gently turn (roll) the brush handle so the bristles clean

the bracket and the rest of the tooth before you glide the

bristles to the next tooth. Continue this until you have

brushed all of your teeth. Please note that brush heads

will wear out sooner when used on braces.

Dental restorations (dental work)

, Use Sonicare on dental restorations (such as implants,

caps, crowns, bridges and fillings) as you would on your

natural tooth surfaces to reduce plaque build-up and

improve gum health. Work the bristles around all the

areas of the restoration for thorough cleaning.

Periodontal pockets

, Your dental professional may have indicated that you

have periodontal pockets, deep pockets where plaque

bacteria collect. If this is the case, after brushing for a full

2 minutes, spend extra time gently brushing these areas to

improve your gum health.

Features

Easy-start brushing power ramp-up

, All Sonicare models come with the Easy-start feature

activated (on), which helps you get used to brushing

with Sonicare.

, Brushing power will gently increase to full power over

the first 12 brushings.

, The Easy-start feature is active if you hear 2 beeps

immediately after turning on your Sonicare. Once you

reach optimal brushing power (after the 12th brushing),

you will no longer hear the double beep at the beginning

of your brushing routine.

Note: Each of the first 12 brushings must be at least 1 minute in

length to properly move through the Easy-start ramp-up cycle.

To deactivate or activate the Easy-start feature:

1

Attach your brush head to the handle.

2

Place the handle in a plugged-in charger base.

3

To deactivate the Easy-start feature, press and hold the

power button for 5 seconds. You will hear 1 beep to

indicate that the Easy-start feature has been deactivated.

EngliSh

9

This manual is related to the following products: