beautypg.com

Philips Essence e5000 User Manual

Page 10

background image

4

To activate the Easy-start feature, press and hold the

power button for 5 seconds. You will hear 2 beeps to

indicate that the Easy-start feature has been activated.

Using the Easy-start feature beyond the initial ramp-up period

is not recommended and reduces the effectiveness of your

Sonicare toothbrush in removing plaque.
The Easy-start feature should be deactivated and the handle

fully charged when Sonicare is used in clinical trials.
Smartimer 2-minute timer

, All Sonicare models come with the Smartimer feature,

which automatically sets the brushing time to the 2

minutes recommended by dental professionals.

, After 2 minutes the Smartimer will automatically turn off

the toothbrush.

, If you wish to pause or stop brushing during your

2-minute cycle, press the power button. Press the power

button again and the Smartimer will pick up where you

left off.

, The Smartimer will automatically reset to the beginning of

a 2-minute cycle if:

- brushing is paused for 30 seconds or longer;

- the handle is returned to the charger base.

Quadpacer 30-second interval timer (available on

select models).

, Quadpacer makes sure that you brush all sections of your

mouth evenly and thoroughly. At 30, 60 and 90 seconds,

you will hear a short beep and a pause in brushing action.

This is your signal to move to the next section of your

mouth.

Battery charge indicator (available on select models).

, If your Sonicare has a low charge, you will hear 5 beeps

after you have brushed your teeth for 2 minutes and the

charge indicator light will flash rapidly.

When you hear the low charge indication, you have 3 or fewer

2-minute brushings left.

1

Place the handle in the charger base (with the power

button facing towards you) to begin the recharging

process.

, The charge indicator light flashes slowly when the handle

is in the charger base to signal charging is in progress.

, When the Sonicare is fully charged, the charge indicator

light is constantly on (not flashing), signaling that your

Sonicare is ready for use.

When not in use, keep your Sonicare in the charger base to

maintain a full battery charge.

EngliSh

10

This manual is related to the following products: