Palm handheld m100 - Manual (Page 16)

12
Battery power
Battery power
Use two AAA batteries. To conserve battery life, minimize the use of
the backlight, and go to General preferences to shorten the idle time
before your handheld turns itself off.
If the batteries are so weak that your handheld does not operate, your
data is safe for about two weeks. Enough energy may remain to
preserve data, but not enough let you turn on your handheld. If your
handheld does not turn on when you press the power button, insert
new batteries immediately.
Removing and reattaching the flip cover
To remove the cover:
1. Grasp the hinge with your thumb.
2. Gently rock the cover from one side
to the other until the hinge prongs
release from the handheld.
Changing the faceplate
To remove the faceplate:
1. Remove the flip cover.
2. Lift the faceplate tab slightly to
separate it from the handheld; then
pull the faceplate away from the
handheld.