Philips 9125 - Manual (Page 16)

14
CALLER ID OPERATION
Reviewing Call History
1 Press and release
C. The screen displays CALL #01 and the name
of the most recent caller.
2 Press 7 to display the phone number and time of the displayed call.
3 If call information is followed by
→
, press 9 to see the information
that did not fit on the screen.
4 Press
> or < to scroll forward or backward through the call history.
Removing a Call from Call History
Press and release
c to remove displayed information from the call
history. The screen displays DELETING SINGLE CALL.
Removing All Calls from Call History
1 Press and hold
c for more than two seconds. The screen
displays DELETE ALL? DEL TO ALLOW.
2 Press and release
c again to remove all calls. The screen
displays DELETING ALL CALLS
— OR —
Press and release any other key to cancel.
Dialing a Number in Call History
As you review calls in history, you can dial a displayed phone number. The
phone will dial only the last seven digits of a phone number, so you may
have to add an area code before sending the call.
1 Enter the area code you need (for example, 1 973) if necessary.
2 Press and release
C.
3 Use
< or > to locate the caller you want.
4 Press and release
P to dial the number.
Lucent 9125 book.L1 4/8/98, 11:25 AM 14