PLUS Vision DLPTM Technology Projector - Manual (Page 22)

User’s Manual
Operation 18
Setting effects
Auto To reset display, image and control settings to factory settings.
Language To select the OSD menu language. Eight languages are supported: English, French,
German, Italian, Spanish, Korean, Simplified Chinese and Traditional Chinese. (See
Figure 27).
Mirror To select Normal projection, H-Invert projection, V-Invert projection, or H/V
Invert projection.
Auto Off To set the time to turn the power off after the start up screen is displayed and no
signal is detected or sync is out of range. To select, use “
3” (KEYSTONE-) or
“
4” (KEYSTONE+) to set the time. 0 means Auto Off function inactive.
*Default setting is 0 (stop).
Lamp The usage time of lamp will display on this item. And you can reset the usage time
of lamp from this item after you change a new lamp (See page 15).
D. Source Page
This Sub-page will only show up whenever AV box
is attached.
There are five items on this page: Source, Volume,
Treble, Bass, and Mute.
*The priority of input signal detection: (a.) PC (b.) S-
Video (c.) Video.
*When selecting input sources, the projector will
detect the selected input simultaneously, and the
OSD menu will still exist on the screen.
Items Description
Source
3 input sources are available in the items when AV box is connected to the
projector: PC, Video, S-video
Volume To set the volume level of speaker built in the AV box.
Treble To set the treble level of speaker built in the AV box.
Bass To set the bass level of speaker built in the AV box.
Mute To turn on/off the mute function.
Figure 28 Source sub-page (AV box attached)