LG EARTH STOVE 2800HT - Manual (Page 10)

INSTALLATION
PAGE 10
10. Offsets can be handled using an offset adapter (it
aligns starter pipe with flue. See Offset Adapter,
page 26 for ordering information). Do not push insert
in completely until surround assembly is installed.
Care should be used to ensure that this adjustable
connector is oriented so it does not angle downhill
when positioned on the flue outlet on top of insert.
11. If the floor of the fireplace is lower than the hearth,
leveling bolts will need to be installed (not included
with the hardware. Use a 3/8” (10 mm) bolt with 2
nuts). The bolt length should be at least 1” (25.4 mm)
longer than needed. Locate the leveling bolt brackets
on the sides of the insert in the back. Install the 2
leveling bolts with nuts and adjust length as needed.
12. Reaching over the top of the insert, install the starter
pipe in the stove flue, or attach the positive flue con-
nection to the insert. See * Note, page 11.
CORRECT
WRONG
CORRECT – Level
or even. Slightly up
at the outbound
end is better.
WRONG – This may
produce a problem
of smoking during
refueling, or poor
chimney draw.