Operating additional equipment, Connecting audio amplifiers – Loewe Spheros R 37Full-HD+ User Manual

Page 44

- 44

Connecting audio amplifiers

The sound components wizard permits configuration of different audio
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
See the operating manual of the audio amplifier for more information.

Call TV menu.

34 Select Connections,
6 go to the menu line below.

Select Sound components.

OK calls the sound components wizard
6

Mark the HiFi/AV amplifier.

OK to continue.
34

Select Digital audio transmission.

Continue, depending on the amplifier, see right column.

Explanations of the setting possibilities:

Select the setting when an amplifier is connected and the
TV speakers are not used.

Select the setting when an amplifier is connected and the
TV speakers are used. In the sound mode selection the
audio reproduction can then be switched between the
amplifier and the TV speakers.

Specify sound formats which can be decoded with the
digital amplifier (see operating manual of the used ampli-
fier).

Select either stereo or surround amplifier.

For every connected surround amplifier, select whether
the TV loudspeakers are to be used as centre speaker.
If so, establish a connection between the centre output
of the amplifier and the centre input of the TV set AUDIO

IN1 C with a cinch cable.

Attention: Do not use the centre speaker connection of

the amplifier, use the centre pre-amp output instead!

Connecting digital audio amplifiers

Continuation of the left column above ...

For digital audio transmission: Select yes.

Connect the digital audio output of the TV set AUDIO

DIGITAL OUT with the digital audio input of the amplifier
via a cinch cable:

Sound formats, amplifier type and other settings, see
explanations of the setting possibilities.

Connecting analogue audio amplifiers

Continuation of the left column above ...

For digital audio transmission: Select no.

Connect the analogue audio output of the TV device

AUDIO OUT L/R via a stereo cinch cable to the analogue
audio input of the amplifier:

For selecting the amplifier type and making other settings,
see explanations of the setting possibilities.

Operating additional equipment

HiFi/AV

amplifier

HiFi/AV

amplifier or TV

speakers

(switchable)

Sound formats

Type of

amplifier

TV loudsp. as

centre speaker

END

TV speakers

Speakers system

HiFi/AV amplifier 

HiFi/AV amplifier or TV speakers (switchable)

Sound components
Sound playback via ...

Proceed

PREOUT

SUB

AUX1 IN

DIGITAL

OUT

AUX OUT AUX 2

TV set

Digital amplifier

AUDIO DIGITAL OUT