Lennox Hearth PAGEPRO 4650EN - Manual (Page 170)

Clearing Media Misfeeds 160
Clearing a Media Misfeed at the Fuser Unit
1
Remove any media from the
center output tray.
"
If the duplex is installed,
open the cover of the
duplex first. Refer to
“Clearing a Media Mis-
feed at the Duplex” on
page 158.
2
Lift the second lever from the top
left corner of the back of the
printer.
3
Open the rear cover.
"
Do not touch any parts
inside the printer.