beautypg.com

LST BC06-2 User Manual

Description

background image

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED

BC06_DBL_LST_EN_0826.PDF • PAGE 1

A

Building Safety. Building Security.

• For application in small systems
• Up to 6 detector zones in conventional

technology

• Differentiation between the activation

of automatic detectors and manual call

points on the same detector line

• Evacuation function (NEN 2575)
• Tested to EN 54-2, -4 by VdS

Fire is a permanent threat to life and property. There-

fore, immediate response to a fi re is imperative. The

main objective of the Fire Detection Control Panel

Series BC06 is to alarm and to react in time and, con-

sequently, save lives and protect property. For decades

LST have focused their aims to undertaking unrivaled

efforts in order to realise new innovations in the security

area. Research, development and production are loca-

ted within LST premises, thus guaranteeing fl exible and

reliable individual solutions.

Using a powerful processor system and a large num-

ber of integrated functions, the Fire Detection Control

Panels Series BC06 ensure topmost effi ciency and

speed – prerequisites for saving lives and minimising

damage to property.

Description

Already in the basic version the Fire Detection Control

Panels BC06-1 and BC06-2 are equipped with four de-

tector lines and, owing to its sophisticated factory set-

tings, are immediately ready for operation. This allows

for quick and effi cient application of the product.

The conventional technology allows for the connection

of automatic and non-automatic fi re detectors as well as

a wide range of special detectors with contact output.

Alarms from manual call points and from automatic de-

tectors that are connected together to one detector line

can be differentiated and thus evaluated differently by

the fi re detection control panel, by means of an optional

coding module.

Thanks to the two auxiliary inputs whose parameters

can be freely set as well as the eight open-collector

outputs with predefi ned function, manifold tasks in the

fi eld of fi re alarm technology can be realised.

The optional evacuation function serves for the actu-

ation of alarming devices independent from activated

alarms. Depending on the parameterisation, different

country-specifi c regulations (e.g., NEN 2575) can be

fulfi lled.

The Fire Detection Control Panels BC06-1 and BC06-2

provide a slot for the installation of the optional Zone

Extension Board ZEB2-1. With this expansion module

the control panel can be upgraded from four to six de-

tector zones.

A printer for the event log can be connected via the

optional Serial Interface Module SIM06-1.

The Fire Detection Control Panel BC06-2 differs from

the BC06-1 by the additionally integrated 4-digit electro-

nic alarm counter.