Onvection cooking, Start oven, Touch you see – KITCHENAID 3828W5A0969 User Manual
Page 45: You see
45
C
onvection cooking
3. Start oven.
NOTES:
•
Oven will preheat to 450°F (232°C).
When the oven temperature reaches
150°F (66°C), the temperature will be
displayed. The displayed temperature
will change each time temperature goes
up by five degrees.
•
If you open the door or touch
CANCEL/OFF during preheating,
preheating will stop. To resume
preheating, close the door and
touch START.
•
When the oven reaches the set
preheat temperature, two tones will
sound and the oven will automatically
hold that temperature for 30 minutes.
The Display will show the set
temperature.
4. After preheating, open the door,
put food in oven, and close
the door.
NOTE: You can see the cooking
temperature anytime during cooking by
touching CONVECTION BROIL. The
cooking temperature will show for
3 seconds.
At end of cooking time:
TOUCH
YOU SEE
(display shows oven
is preheating)
START
TOUCH
YOU SEE
START
CONV
COOK
TIME
(time for cook cycle will
count down)
YOU SEE
ENTER
SENSOR
WEIGHT
PREHEAT
AUTO
ROAST
COOK
PWR
DEFR
QTY
TEMP
PROBE
START?
CONV
COMB
OZ
DELAY
LBS
COOK
2 3 4
TIMER
PREHEAT
TEMP
CONV
COOK
4359916v08c101 9/11/98 3:44 PM Page 45