Using the lcd screen as a viewfinder, Using digital zoom – Kodak EasyShare C530 User Manual
Page 13

Taking pictures and videos
www.kodak.com/go/support
7
Using the LCD screen as a viewfinder
IMPORTANT: The Liveview feature depletes battery power; use it sparingly.
1 Turn the Mode dial to
.
2 Press the OK button to turn on the LCD screen.
3 Frame your subject in the LCD screen.
4 Press the Shutter button to take the picture.
5 To turn off the LCD screen, press the OK button.
To make the LCD screen turn on whenever the camera is on, see
.
Using digital zoom
Use digital zoom in Auto mode to get up to 5X closer to your subject.
IMPORTANT: You may notice a decrease in printed image quality when using digital
zoom. The blue slider on the zoom indicator pauses and turns red when the
picture quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm)
print.
1 Press the OK button to turn on the LCD screen, then
press .
The LCD screen displays the zoomed image and the
zoom indicator.
2 Press
to zoom in and out.
3 Press the Shutter button to take the picture.
To turn off digital zoom, from the lowest setting,
press .
NOTE: You cannot use digital zoom for video recording.
Digital zoom is available only when Liveview is turned on (see
).
OK button
Zoom indicator