Konica Minolta DYNAX 3 - Manual (Page 51)

DET
AILED
OPERA
TION
101
Press the date button to
choose the date imprinting
format.
• The display changes as follows:
Imprinting the Date or Time
1
Press the shutter-release
button to set the format. 2
Turn the control dial to
change the date and time
values.
• Data continues changing as long as
the dial turns.
Press the shutter-release
button to set the date and
time.
• The usual display will return.
Repeat steps 2 and 3 until
the date and time are
displayed correctly. 4
5
3
Control Dial
• The current date and time are stored in a memory register each time the
camera is turned on or off. This feature saves time resetting the clock and
calendar when changing batteries, see page 21.
100
FOR OWNERS OF THE QUARTZ DATE MODEL
The quartz-date function lets you record the date or time on the lower-left
corner of the photograph. The quartz date back has an automatic
calendar through the year 2039.
• Imprinted data may be difficult to read if the lower-left corner of the photograph
is bright or non-uniform.
• Do not use the data back when temperatures are outside the range of 0° to
50°C (32° to 122°F).
• Since the date is recorded when the film is advanced to the next frame,
sometimes the last frame of the roll will not have the date printed on it.
Date button
Select button
Press the date button.
Press the select button (SEL)
to select the year, month,
day, hour, or minute.
• The item that can be changed will
blink.
• The data back has a 24-hour clock.
2pm should be set as 14:00.
• The item will cycle as follows.
Setting the Date or Time
Year Month Day Hour Minute
1
2