Assembly hp-97 – Suzuki Musical Instrument Corp. HP-97 User Manual
Page 9
9
ASSEMBLY HP-97
BACK PANEL ASSY.
)
)
ASSEMBLE THE PIANO STAND
NOTE: Do all your final tightening only after the assembly has been
completed.
2.
Attach the Back Panel to the bracket on each of the two legs.
Use four of the Back Panel Bolts to attach this piece.
3.
Attach the Back Panel to the Pedal Board Assembly.
Use five of the Back Panel Bolts to attach this piece.
Attach the Back Panel to the
Leg Brackets.
Attach the Back Panel to the
Pedal Board.
LEG & PEDAL ASSY.
)
)
ASSEMBLE THE PIANO STAND
NOTE: Do all your final tightening only after the assembly has been
completed.
1.
Attach the horizontal pedal assembly to the two legs. Use the four Leg
Bolts.
Insert the Leg Bolts up through the holes on the side leg and into the
Pedal Assembly and tighten. Remembering to do all your final tightening
only after the assembly is complete.
2
ASSEMBLE
THE PIANO
STAND